3D Systems Cubify CUBEX Duo Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für 3D-Drucker 3D Systems Cubify CUBEX Duo herunter. 3D Systems Cubify CUBEX Duo 10 Seiten. Replacing a main board pcb
Auch für 3D Systems Cubify CUBEX Duo: Ersatz-Handbuch (13 seiten), Ersatz-Handbuch (17 seiten), Handbuch (10 seiten)

Seite drucken
3D Systems Cubify CUBEX Duo Handbuch

Voltage Measurement Locations

Depending which stepper motor chip voltage you want to read, you will need to
position your multimeter in different positions of the board. You will need to place a
small screwdriver with one end of the multimeter clipped onto it on the small screw
head labelled TP – and another end of the multimeter will need to be set to ground
on the board.
TP X will measure the voltage for the X axis.
TP Y will measure the voltage for the Y axis.
TP Z will measure the voltage for the Z axis.
TP E1, TP E2 and TP E3 will measure the voltage for print jets 1, 2 and 3.
TP Y
TP X
TP Z
Ground
6