3D Systems Cubify CUBEX Duo Manual - Page 6

Browse online or download pdf Manual for 3D Printers 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 10 pages. Replacing a main board pcb
Also for 3D Systems Cubify CUBEX Duo: Replacement Manual (13 pages), Replacement Manual (17 pages), Manual (10 pages)

Print Page
3D Systems Cubify CUBEX Duo Manual

Voltage Measurement Locations

Depending which stepper motor chip voltage you want to read, you will need to
position your multimeter in different positions of the board. You will need to place a
small screwdriver with one end of the multimeter clipped onto it on the small screw
head labelled TP – and another end of the multimeter will need to be set to ground
on the board.
TP X will measure the voltage for the X axis.
TP Y will measure the voltage for the Y axis.
TP Z will measure the voltage for the Z axis.
TP E1, TP E2 and TP E3 will measure the voltage for print jets 1, 2 and 3.
TP Y
TP X
TP Z
Ground
6