3D Systems Cubify CUBEX Duo Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Stampanti 3D 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 10. Replacing a main board pcb
Anche per 3D Systems Cubify CUBEX Duo: Manuale di sostituzione (13 pagine), Manuale di sostituzione (17 pagine), Manuale (10 pagine)

Stampa la pagina
3D Systems Cubify CUBEX Duo Manuale

Voltage Measurement Locations

Depending which stepper motor chip voltage you want to read, you will need to
position your multimeter in different positions of the board. You will need to place a
small screwdriver with one end of the multimeter clipped onto it on the small screw
head labelled TP – and another end of the multimeter will need to be set to ground
on the board.
TP X will measure the voltage for the X axis.
TP Y will measure the voltage for the Y axis.
TP Z will measure the voltage for the Z axis.
TP E1, TP E2 and TP E3 will measure the voltage for print jets 1, 2 and 3.
TP Y
TP X
TP Z
Ground
6