Canon XL 1 사용자 설명서 - 페이지 15

{카테고리_이름} Canon XL 1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon XL 1 26 페이지. Camcorder
Canon XL 1에 대해서도 마찬가지입니다: 브로셔 (8 페이지), 사양 (1 페이지), 지침 (2 페이지), 브로셔 및 사양 (8 페이지), 사용자 설명서 (9 페이지), 매뉴얼 (9 페이지)

페이지 인쇄

b. Turn the LEVEL dial to adjust the recording level and BALANCE dial

to adjust the balance between the 2 inputs. Check the levels in the

audio LCD panel. Note: you can not adjust he volume level

independently for the left and right channels. We recommend keeping

the level below the 12 point index mark, and monitoring the sound

using headphones. You can adjust the headphone volume by rotating

the PHONES LEVEL dial.

Audio Input for Four Channel Recording (Stereo 1 and Stereo 2, simultaneous

recording of all four channels) using the RCA jacks, where the sound sources are the

supplied microphone; external microphones; VCR, CD or other line-in devices; or

using XLR type microphones.

Four channel recording can be the most versatile configuration. For example, you can

input two external wireless microphones and use the supplied microphone, all

simultaneously.

1. Open the Camera Menu and select AUDIO MODE.

Select 12-bit ST-1, 2 and close the menu. "12bit ST-1,2" is displayed in the

viewfinder and main LCD panel. Selecting Audio Mode 12-bit ST-1,2

(32kHz, 4 channels) is for simultaneous recording on four channels (referred

to as Stereo 1 and Stereo 2).

2. To set the input for Stereo 1:

Use the supplied mic or external microphone plugged into the mini jacks.

Slide the INPUT SELECT switch to MIC. This assigns the MIC mini jacks as

the source for the audio input. In place of the supplied microphone, you can

attach an external microphone to the mini jacks.

Slide the INPUT SELECT switch to ATT. If you are recording in a very loud

environment, you may want to use the attenuator. The attenuator reduces loud

noises to produce a more natural sound.

Use the Audio 1 RCA jacks on the back of the camcorder to record sound

from a VCR, CD or other line-in devices; or XLR microphones. Switch the

Input Selector to Audio 1. Open the Camera Menu and select the appropriate

option for AUDIO 1 IN:

a. LINE: to record sound from a VCR, CD or other line-in devices

b. MIC ATT20: to record high-level sound using a microphone

c. MIC: to record sound using an XLR microphone attached to the MA-

100 Microphone Adapter/Shoulder Pad.