Galvin Specialised Ezy-Drink CP-BS TD15EB 제품 설치 매뉴얼 - 페이지 3

{카테고리_이름} Galvin Specialised Ezy-Drink CP-BS TD15EB에 대한 제품 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Specialised Ezy-Drink CP-BS TD15EB 4 페이지. Remote electronic drinking bubbler tap - battery

페이지 인쇄

3. Fit Piezo Button

−

Install piezo button as shown.

−

Ensure the correct coloured washer is fitted

underneath the button.

5. Fit Solenoid and Outlet

−

Fit flexi-hose to solenoid outlet and

bubbler.

−

Connect water supply to solenoid inlet.

4. Connect Piezo Button, Solenoid and Battery

−

Connect Piezo button, the solenoid & the battery to the

eletronic control unit.

−

The unit is supplied with 2 x 3.2metre extension leads

for connecting to battery and solenoid.

6. Testing

−

Once the drinking tap has been installed and tested

for leaks, the water height may be adjusted to suit the

available pressure as shown above.

−

To adjust water flow

1. Remove the blanking screw.

2. Adjust the water height by turning the regulator

screw.

3. Once desired height has been achieved, replace

blanking screw.

Note: The full range from minimum flow to maximum flow is

only ¼ turn.

Version 1, 16

June, Page 3 of 4

Blanking Screw

Regulator Screw