Fujitsu ETERNUS DX100 S3 설정 매뉴얼 - 페이지 10

{카테고리_이름} Fujitsu ETERNUS DX100 S3에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX100 S3 15 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX100 S3에 대해서도 마찬가지입니다: 수동 서버 연결 구성 (12 페이지), 수동 서버 연결 구성 (12 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (13 페이지), 안전 주의사항 (12 페이지)

페이지 인쇄

1. Server Connection

Establishing a Connection between the ETERNUS DX and the Operation Management LAN

Remove the LAN cable between the RMT port on Controller 0 and the PC terminal.

Connect the LAN cables of the MNT ports on Controller 0 and Controller 1 to the network of the customer.

Then start the web browser from the PC terminal that is connected to the network and log in to ETERNUS Web GUI

again with the IP address that is set in the Setup Network Environment settings. After login, the Overview screen

appears.

Firewall Settings

Set the firewall for each service.

Click the [System] tab, click [Network] in [Category],

and then click [Setup Firewall] in [Action].

Enable or disable each service.

If the network environment for the MNT

IMPORTANT

port is not set up, some functions will be

unusable. Make sure to set up the network

environment.

FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide

P3AM-7852-06ENZ0