Fujitsu ETERNUS DX100 S3 설정 매뉴얼 - 페이지 9

{카테고리_이름} Fujitsu ETERNUS DX100 S3에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX100 S3 15 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX100 S3에 대해서도 마찬가지입니다: 수동 서버 연결 구성 (12 페이지), 수동 서버 연결 구성 (12 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (13 페이지), 안전 주의사항 (12 페이지)

페이지 인쇄

1. Server Connection

ETERNUS Web GUI Startup

Open the Web browser on the PC terminal.

Enter the following URL in the address bar of the Web

browser.

http://192.168.1.1/

The login screen for ETERNUS Web GUI appears.

To change the user interface language, click the

[Option] button and select "English" or "Japanese" in

"Language".

Enter the username and password.

Username: root

Password: root (by default)

After logging in, the Initial Setup screen of ETERNUS Web GUI appears.

Initial Setup

Perform the settings that are required before operation of the ETERNUS DX on the Initial Setup screen.

Perform the following settings according to the wizard

screen:

●

Set Storage System Name

●

Change User Password

●

Set Thin Provisioning

●

Setup Network Environment

In the Setup Network Environment settings, set the IP

address of the MNT port to connect the ETERNUS DX to

the operation management LAN.

Make sure to set up the network

IMPORTANT

environment for the MNT port.

If the network environment for the MNT

port is not set up, some functions will be

unusable.

After the settings are complete, close the Web browser.

FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide

P3AM-7852-06ENZ0