Dolby Laboratories CP750 설치 매뉴얼 - 페이지 11
{카테고리_이름} Dolby Laboratories CP750에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolby Laboratories CP750 19 페이지. 7.1 audio for the dolby multichannel amplifier
페이지 인쇄
- 1. Introduction to Dolby Cp750 7.1 Audio for the Dolby Multichannel Amplifier
- 2. About the Cp750 (or Other Cinema Processor) Configuration for the
- 3. Connecting a Cp750 (or Other Sound Processor) to a Media Block
- 4. Configuring Advanced Connections
- 5. Cp750 Audio Output Cable Pinouts
- 6. To 25-Pin D-Connector Digital Audio Pinouts
2. Ensure that the Yamaha Tio1608-D is powered up, wait for Dante Controller to detect it, then
click the Device Info tab.
The Device View window appears. The Receive tab is selected at the left side of the window,
which displays channels 1 through 8.
3. Double-click the Yamaha Tio1608-D in the Available Channels pane on the right side of the
Device View window.
4. Click the AES67 Config tab, then click Enabled in the drop-down menu.
5. Click the Reboot button to enable AES67, as indicated by the dialog message.
Dolby CP750 7.1 audio for the Dolby Multichannel Amplifier Installation Manual
7 May 2018 Issue 1
Setting up the system
11