DG FPGA Setup - Page 3

Browse online or download pdf Setup for Computer Hardware DG FPGA. DG FPGA 5 pages.
Also for DG FPGA: Setup (14 pages), Setup (20 pages), Setup (8 pages), Setup (10 pages), Setup (18 pages)

Print Page
DG FPGA Setup
dg_ll10gemacip_fpgasetup_xilinx.doc
5) Power on FPGA board.
6) Open Serial console. When connecting FPGA board to PC, many COM ports from FPGA
connection are detected and displayed on Device Manager.
For ZCU102, select COM port number of Interface0 to be Serial console.
On Serial console, use following setting: Buad rate=115,200, Data=8-bit, Non-Parity, and
Stop = 1.
7) Download configuration file and firmware to FPGA board.
i) Open Vivado TCL shell and change current directory to download folder which includes
demo configuration file and command script file for download.
ii) Type "ll10gemaclptest_zcu102.bat" to configure FPGA and download firmware, as
shown in Figure 2-4.
Figure 2-4 Example command script for download to ZCU102 by Vivado tool
29-Apr-21
Figure 2-3 COM port number for Serial console
Page 3