DG FPGA Setup - Page 15

Browse online or download pdf Setup for Computer Hardware DG FPGA. DG FPGA 20 pages.
Also for DG FPGA: Setup (5 pages), Setup (14 pages), Setup (8 pages), Setup (10 pages), Setup (18 pages)

Print Page

dg_toeudp25gip_fpgasetup_xilinx.doc

3 Test environment setup when using two FPGAs

Before running the test, please prepare following test environment.

• Two FPGA development boards which can be the same board or different board: KCU116,

VCU118 board, and FB2CGHH@KU15P card

• 25Gb Ethernet cable:

a) VCU118 and FB2CGHH@KU15P card: SFP28 transceiver (25GBASE-SR), QSFP28

transceiver (100GBASE-SR) and MTP to 4xLC Fiber cable

b) KCU116: 25G SFP28 Active Optical Cable (AOC).

• USB cable for connecting between FPGA and PC

a) KCU116 and VCU118: 2 micro USB cables for programming FPGA and Serial console

b) FB2CGHH@KU15P card: mini USB cable for programming FPA and JTAGUART

• VCU118 and KCU116 board: Serial console software such as TeraTerm, installed on PC.

The setting on the console is Baudrate=115,200, Data=8-bit, Non-parity and Stop=1.

Note: JTAG Terminal in applied instead of Serial console when using FB2CGHH@KU15P

card.

• Vivado tool for programming FPGA and JTAG Terminal (when using FB2CGHH@KU15P

card), installed on PC

7-Jun-21

Page 15