3D Hobby Shop YAK55 Montagehandleiding - Pagina 10
Blader online of download pdf Montagehandleiding voor {categorie_naam} 3D Hobby Shop YAK55. 3D Hobby Shop YAK55 19 pagina's.
Pagina afdrukken-- Insert the rudder into the fuselage, make sure it swings 45 degrees in both directions, and glue the hinges with a
couple of drops of thin CA from each side as shown.
-- Slide the tail wheel bracket over the wire and screw the wood screws into place through the bracket as shown below.
Make sure that the rudder swings freely.
-- Remove the screws to apply thin CA to the screw holes.
-- Screw the bracket back into place after the thin CA has cured.