Ansa RS-1 Instrukcja instalacji i obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Jednostka sterująca Ansa RS-1. Ansa RS-1 12 stron. Ansa roller door remote control unit

Drukuj stronę
Ansa RS-1 Instrukcja instalacji i obsługi
ANSA RS-1 Roller Door Remote Control System
Contents
1
2
2.2
3
4
5
RS1 Control Board Overview & Wiring Schemes
6
7
8
9
Commissioning
Installation instructions
Please read these instructions carefully prior to commencing installation of the unit. Operate unit only when the door is in full view and
free from any obstruction. No one should enter or leave the garage while the door is in motion.
This booklet covers RS-1 units manufactured from 01.01.2010 having the PCB identification
NOTE TO INSTALLER - PLEASE ENSURE THIS MANUAL REMAINS WITH THE END USER AS IT CONTAINS IMPORTANT SAFETY INFORMATION
Installation Company: ......................................................... Installer: ......................................................... Tel: ................................................. Fitting Date: ........................

1 - General Description

The ANSA RS1 control unit is designed to operate roller garage doors fitted with single phase tubular motor drives. Equipped with "rolling
code" high security remote controls, allowing easy memorisation of up to fifteen transmitters. The unit has all the features needed for efficient,
safe and reliable operation of roller doors including built-on courtesy lamp, operating button and multi- function red indicator LED. This guide
includes information on ANSA Photoelectric Safety Beams, ANSA Light Grid Safety System, ANSA Alarm System and popular ANSA access
controls.
2

General Operation

Your Door Supplier will recommend the ideal combination of access control and safety
options to suit each installation and program the system accordingly. As a guide, the
general operation for a fully commissioned door is as follows:
2.1 Keyfob Transmitter Operation
To open the door, press the button on the keyfob transmitter for one second.
·
The door will fully open and stop automatically at the fully open position.
To close the door, press the button on the keyfob transmitter for one second.
·
The door will fully close and stop automatically at the fully closed position.
Pressing the button during a door opening or closing operation will instantly stop
·
the door and pushing the button again for one second will reverse the original
direction.
Please note that a delay of one second is built into the operation.
·
Allow for this delay after operating the keyfob Transmitter

2.2 Multi Channel Keyfobs

Multi Channel Keyfobs use one button per door, enabling control of up to 4
garage doors from one keyfob transmitter. These are available on request.
Additional Remote Control Receiver Modules are also available to control
automatic gate systems, driveway lighting and other equipment from
ANSA Multi Channel Keyfobs.
Page 1
10
Adding transmitters & wireless access controls
11
Deleting transmitters & wireless access controls
12
Multi- door control
13
Holiday Mode
14
Fault diagnostic system
15
Dip Switch options & Special settings
16
Problem solving guide
17
Technical specifications
Figure 2
3
(See figure 8)
RS1G