AQUAPHOR OSMO PRO 50 EU Manual - Página 10
Procurar online ou descarregar pdf Manual para Sistemas de filtragem de água AQUAPHOR OSMO PRO 50 EU. AQUAPHOR OSMO PRO 50 EU 16 páginas.
Changing the replacement cartridges
The service life of the membrane cartridge (3) de-
pends on the performance of the water treatment
unit (2), therefore it is very important to replace
the Pro 1 cartridge in a timely manner.
Replacing Pro M / Pro HFM
Cartridges
• Close the tap on the storage tank.
• Close the inlet tap on the connection unit and
open the clean water tap to relieve pressure.
• Turn the used cartridge counterclockwise and
remove it.
• Remove the packing tape from the new cartridge.
• Insert the new cartridge into the housing as far
as it will go and, using slight pressure, turn the
cartridge clockwise until it clicks.
• Install the flush plug in the middle slot (instead
of the membrane cartridge).
• Open the inlet tap on the connection unit (23)
and the clean water tap (7).
• Drain the water passing through the OSMO Pro
for 10 minutes.
• Close the inlet and clean water tap.
• Remove the flush plug and install the membrane
cartridge by turning the cartridge clockwise
until it clicks.
• Open the inlet tap and check that the OSMO
Pro connections are tight.
10
Replacing the membrane
cartridge
• Close the tap on the storage tank.
• Close the inlet tap on the connection unit and
open the clean water tap to relieve pressure.
• Turn the used membrane cartridge counter-
clockwise and remove it.
• Remove the packing tape from the new cartridge.
• Insert the new cartridge into the housing as far
as it will go and, using slight pressure, turn the
cartridge clockwise until it clicks.
• Open the inlet tap on the connection unit, the
storage tank tap and the clean water tap.
• Drain the OSMO Pro for 1 hour.
• Close the clean water tap.
• Make sure the OSMO Pro connections are tight.