DIS Sensors QG40N Руководство пользователя - Страница 13

Просмотреть онлайн или скачать pdf Руководство пользователя для Переключатель DIS Sensors QG40N. DIS Sensors QG40N 15 страниц. Tilt/acceleration switch (sil1 plc)
Также для DIS Sensors QG40N: Руководство пользователя (5 страниц), Руководство по эксплуатации и технике безопасности (6 страниц)

Печатать страницу
DIS Sensors QG40N Руководство пользователя

Mounting

Figure 8 - Horizontal mounting 2-axis
• The sensor should be mounted on a stable flat surface with at least two screws tightened.
• Never move the sensor by pulling the cable.
• A 1-axis tilt switch must be mounted vertically. The factory default zero position is with the
male connector pointing down as shown in Figure 3. The sensor can be zero adjusted at any
position within the full range.
• A 2-axis tilt switch must be mounted horizontally. The factory default zero position is shown
in Figure 2. After installation, the sensor can be zero adjusted to eliminate the mechanical
offsets within a ±5° offset range.
DIS SENSORS BV
User Manual - QG40N Tilt/Acceleration Switch (SIL1 PLc) V2.0
Figure 7 - Mechanical drawing of QG40N with a male M12
Figure 9 Vertical mounting 1-axis
12