HP ProCurve 1600M Kurulum Kılavuzu - Sayfa 3

Anahtar HP ProCurve 1600M için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HP ProCurve 1600M 12 sayfaları. Redundant power supply
Ayrıca HP ProCurve 1600M için: Şartname Sayfası (12 sayfalar), Önce Beni Oku (8 sayfalar), İnceleme El Kitabı (27 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kurulum Kılavuzu (36 sayfalar), Kurulum Kılavuzu (28 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Kılavuz Eki (28 sayfalar), Önce Beni Oku (16 sayfalar), Kurulum ve Sökme (2 sayfalar), Planlama ve Uygulama Kılavuzu (40 sayfalar), Ürün Kullanım Ömrü Sonu Sökme Talimatları (2 sayfalar), Kurulum Kılavuzu (46 sayfalar), Teşhis Kılavuzu (2 sayfalar), Sökme Talimatları (2 sayfalar)

HP ProCurve Switch 4000M/8000M

Replacement Fan Tray

The HP ProCurve 4000M and 8000M switches have a replaceable fan tray. The instruc-

tions in this booklet will guide you through the process of replacing the fan tray in

your switch.

Before proceeding, make sure you read the Fan Tray Installation Precautions below.

Included Parts. The following parts should be included in your fan tray replacement

kit:

●

the Replacement Fan Tray assembly (5092-0373)

●

HP ProCurve Switch 4000M/8000M Replacement Fan Tray Installation

Guide (5990-3078), this guide

Tools Needed. To complete these procedures you need only a Torx T-10 screwdriver

or a flat bladed screwdriver.

Fan Tray Installation Precautions

Follow these precautions when installing your HP Switch 4000M/8000M Replace-

ment Fan Tray:

Warnings

●

Make sure that all AC power is disconnected from the switch

before starting the procedures described in this guide. Do not

reconnect the power until the switch is completely reassembled

and cover plates are replaced on any open module slots or power

supply bays.

●

If your switch is rack mounted, make sure that the rack is not going

to tip over as you complete these procedures. If the switch is

difficult to reach, remove it from the rack or other mounting

location before proceeding.

Cautions

●

When handling the switch modules, the fan tray, and the fan tray connec-

tor, do not touch the components or edge connectors on any printed

circuit boards, or the pins on any connectors. Otherwise, damage due to

static discharge could occur.

●

Refer to the installation guides that came with your switch and switch

power supply for precautions on proper handling and installation of the

switch and power supplies. For copies of the installation guides, visit the

HP Procurve web site at http://www.hp.com/go/hpprocurve.