DSC Power 832 설치 매뉴얼 - 페이지 11

{카테고리_이름} DSC Power 832에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC Power 832 17 페이지. Central station talk / listen module
DSC Power 832에 대해서도 마찬가지입니다: 사용 설명서 (11 페이지), 사용 설명서 (18 페이지), 사용자 지침 (2 페이지), 설치 지침 매뉴얼 (12 페이지), 사용자 설명서 (20 페이지), 설치 지침 (2 페이지), 설치 지침 (2 페이지)

페이지 인쇄

1. How to Program

M O D U L E

Depending on the type of device connected, the SYNC input must be

programmed for Normal or Inverted operation. If normal operation is

selected (default), the PC5108L will switch cameras on a low to high

transition (rising edge). If the inverted option is selected, the PC5108L

will switch cameras on a high to low transition (falling edge).

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

External/Internal Dwell Control .................. Subsection [50] Option [4]

SYNC Input Inverted/Normal ..................... Subsection [50] Option [6]

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

4.5 Module Supervision

The control panel only supervises the PC5108L when the Module

Zone Group Assignment section is programmed. When PC5015

programming section [903] Module Supervision Field is entered, the

zone lights corresponding to the zone group assignments will repre-

sent the PC5108L.

The DLM-4L is supervised when the DLM-4L Is Connected option is

enabled. This option must be enabled when using the DLM-4L. When

section [903] Module Supervision Field is entered, the DLM-4L will be

represented by zone light [23].

A Downlook Supervisory Trouble is generated when the panel no

longer detects the DLM-4L on the system. To clear this trouble, enter

Section [902] Supervision Reset. A Downlook Supervisory trouble

restoral will be logged to the event buffer when the trouble is cleared.

For information on module supervision, see the PC5015 Installation

Manual (Section 2.7 "Enable Supervision").

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Supervision Reset ............................................................ Section[902]

Module Supervision Field ............................................... Section [903]

DLM-4L Is Connected ................................ Subsection [50] Option [8]

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

O P E R A T I O N

A N D

P R O G R A M M I N G