Centrica Panoramic Power PAN-10 Installation Manual - Page 6

Browse online or download pdf Installation Manual for Accessories Centrica Panoramic Power PAN-10. Centrica Panoramic Power PAN-10 11 pages.

Print Page
PAN-10 and PAN-12 Sensor installation guide

Safety precautions

•
The sensor must be installed only on an insulated conductor.
The conductor's diameter and maximum current must match the
•
specification printed on the sensor.
•
The sensor should be installed and removed only by a qualified
electrician.
Installation must not be performed on a live wire for reasons of safety
•
and random shock hazard. Power supply to the panel must be shut off
before and during installation.
The sensor must not be installed lying or touching bus bars or any other
•
non-insulated, exposed conductors.
•
Installation is possible both on external entry/exit conductors before
the terminal strip, as well as both ends of the circuit breaker. The least
cramped, most accessible location should be chosen for installation.
The sensor should be installed such that the arrow points in the direction
of the load.

Hardware description

This procedure must be carried out only by a certified electrician. The following
sensors are supported:
32A/63A , snapped-in cover.
•
•
225A, screwed cover.
The sensors are shipped closed, in order to protect the core from dust and
other pollutants. Open a sensor only when preparing to install it.
Figure 1. 32A/63A
Figure 2. 225A
The sensor comes with a label fixed on it, containing a unique ID.
Revision 1.4 January 2018
© 2018 Centrica plc. Registered office: Millstream, Maidenhead Road, Windsor, Berkshire. SL4 5GD.
Registered in England & Wales No 3033654
Figure 3. Core
6