Centrica Panoramic Power PAN-10 Installation Manual - Page 9
Browse online or download pdf Installation Manual for Accessories Centrica Panoramic Power PAN-10. Centrica Panoramic Power PAN-10 11 pages.
Print PagePAN-10 and PAN-12 Sensor installation guide
Registering the installed sensor
See 'Panoramic Power deployment guide'.
Post installation troubleshooting
If the sensor vibrates after installation (you can hear the vibration noise or feel
it when touching the sensor), it means that the sensor is not properly closed.
Try to press the two parts of the sensor or tighten the screws to close it tightly.
If the vibration persists, open the sensor and reinstall it or try using another
sensor.
Monitoring sensor activity
See 'Panoramic Power deployment guide'.
Uninstalling a sensor
Open the sensor in the way you first opened it and remove it from the cable.
Revision 1.4 January 2018
9
© 2018 Centrica plc. Registered office: Millstream, Maidenhead Road, Windsor, Berkshire. SL4 5GD.
Registered in England & Wales No 3033654