Cisco TelePresence IX5200 Première installation - Page 18
Parcourez en ligne ou téléchargez le pdf Première installation pour {nom_de_la_catégorie} Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 pages.
Également pour Cisco TelePresence IX5200 : Manuel de démarrage rapide (15 pages), Manuel de l'utilisateur (26 pages), Manuel d'installation (36 pages)
Imprimer la page
Performing First-Time Setup
Hot swapping of cables is not supported. Be sure to boot or reboot your system after you make any
cabling changes.
Perform camera alignment for your system. If you have a two-table system, proceed to step
Step 5
Place the camera targets (included with the system) so that the line on the back of the target is flush
a.
with the seams between the center and side tabletops.
Be sure that the rear edge of the target is flush with the rear edge of the table.
b.
Be sure that the tabletop is clear, especially the rear edge, then click Continue to begin the test.
c.
Proceed to step
Cisco TelePresence IX5000 and IX5200 First-Time Setup
18
5e.
5d.
OL-27038-01