Cisco TelePresence IX5200 Configuração pela primeira vez - Página 18
Procurar online ou descarregar pdf Configuração pela primeira vez para Sistema de conferência Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 páginas.
Também para Cisco TelePresence IX5200: Manual do utilizador de início rápido (15 páginas), Manual do utilizador (26 páginas), Manual de instalação (36 páginas)
Imprimir página
Performing First-Time Setup
Hot swapping of cables is not supported. Be sure to boot or reboot your system after you make any
cabling changes.
Perform camera alignment for your system. If you have a two-table system, proceed to step
Step 5
Place the camera targets (included with the system) so that the line on the back of the target is flush
a.
with the seams between the center and side tabletops.
Be sure that the rear edge of the target is flush with the rear edge of the table.
b.
Be sure that the tabletop is clear, especially the rear edge, then click Continue to begin the test.
c.
Proceed to step
Cisco TelePresence IX5000 and IX5200 First-Time Setup
18
5e.
5d.
OL-27038-01