Cisco TelePresence IX5200 최초 설정 - 페이지 18

{카테고리_이름} Cisco TelePresence IX5200에 대한 최초 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence IX5200 40 페이지.
Cisco TelePresence IX5200에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (15 페이지), 사용자 설명서 (26 페이지), 설치 매뉴얼 (36 페이지)

페이지 인쇄

Performing First-Time Setup

Hot swapping of cables is not supported. Be sure to boot or reboot your system after you make any

cabling changes.

Perform camera alignment for your system. If you have a two-table system, proceed to step

Step 5

Place the camera targets (included with the system) so that the line on the back of the target is flush

with the seams between the center and side tabletops.

Be sure that the rear edge of the target is flush with the rear edge of the table.

Be sure that the tabletop is clear, especially the rear edge, then click Continue to begin the test.

Proceed to step

Cisco TelePresence IX5000 and IX5200 First-Time Setup

5e.

5d.

OL-27038-01