Cisco TelePresence IX5200 Pierwsza konfiguracja - Strona 18
Przeglądaj online lub pobierz pdf Pierwsza konfiguracja dla System konferencyjny Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 stron.
Również dla Cisco TelePresence IX5200: Skrócona instrukcja obsługi (15 strony), Podręcznik użytkownika (26 strony), Instrukcja instalacji (36 strony)
Drukuj stronę
Performing First-Time Setup
Hot swapping of cables is not supported. Be sure to boot or reboot your system after you make any
cabling changes.
Perform camera alignment for your system. If you have a two-table system, proceed to step
Step 5
Place the camera targets (included with the system) so that the line on the back of the target is flush
a.
with the seams between the center and side tabletops.
Be sure that the rear edge of the target is flush with the rear edge of the table.
b.
Be sure that the tabletop is clear, especially the rear edge, then click Continue to begin the test.
c.
Proceed to step
Cisco TelePresence IX5000 and IX5200 First-Time Setup
18
5e.
5d.
OL-27038-01