Cisco TelePresence IX5200 Prima impostazione - Pagina 18
Sfoglia online o scarica il pdf Prima impostazione per Sistema di conferenze Cisco TelePresence IX5200. Cisco TelePresence IX5200 40.
Anche per Cisco TelePresence IX5200: Manuale d'uso rapido (15 pagine), Manuale d'uso (26 pagine), Manuale di installazione (36 pagine)
Stampa la pagina
Performing First-Time Setup
Hot swapping of cables is not supported. Be sure to boot or reboot your system after you make any
cabling changes.
Perform camera alignment for your system. If you have a two-table system, proceed to step
Step 5
Place the camera targets (included with the system) so that the line on the back of the target is flush
a.
with the seams between the center and side tabletops.
Be sure that the rear edge of the target is flush with the rear edge of the table.
b.
Be sure that the tabletop is clear, especially the rear edge, then click Continue to begin the test.
c.
Proceed to step
Cisco TelePresence IX5000 and IX5200 First-Time Setup
18
5e.
5d.
OL-27038-01