Cisco TelePresence IX5200 Eerste installatie - Pagina 18

Blader online of download pdf Eerste installatie voor {categorie_naam} Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 pagina's.
Ook voor Cisco TelePresence IX5200: Gebruikershandleiding Snel aan de slag (15 pagina's), Gebruikershandleiding (26 pagina's), Installatiehandleiding (36 pagina's)

Performing First-Time Setup

Hot swapping of cables is not supported. Be sure to boot or reboot your system after you make any

cabling changes.

Perform camera alignment for your system. If you have a two-table system, proceed to step

Step 5

Place the camera targets (included with the system) so that the line on the back of the target is flush

with the seams between the center and side tabletops.

Be sure that the rear edge of the target is flush with the rear edge of the table.

Be sure that the tabletop is clear, especially the rear edge, then click Continue to begin the test.

Proceed to step

Cisco TelePresence IX5000 and IX5200 First-Time Setup

5e.

5d.

OL-27038-01